Chillers

TEC series chiller
(Water-cooled)

FCP60024L30W

Model introduction

This device is a water-cooled chiller with functions such as liquid level drop, power outage reset, anti freezing water pump, remote control and the touch screen.

Performance characteristics

This device has excellent performance, small size, low noise, low power consumption, high thermal efficiency. And the control temperatures are lapped with 0.05 ℃ tolerance. Ferrotec can provide custom lead products according to requirements. The device is suitable for environments with good temperature and humidity control. It has functions such as temperature compensation and self diagnosis. In addition, the device can achieve multiple alarm functions such as overheating, overload and water shortage. Remote control is convenient and can be controlled by various communication methods such as RS232, RS485, ETH.

Applications

Widely used in etching equipment of semiconductor industry, CMP(Mechanical Polishing), laboratory precision equipment, high precision testing instruments, cosmetic medicine equipment, solid state laser, mold, etc.

Technical parameters

Model FCP60024L30W
Cooling method Thermoelectric modules
Radiating Method Forced water-cooling
Control Method Cooling/Heating PID control
Ambient Temperature/Humidity 10~35℃, 35~80%RH
Circulating Fluid DI water/15% Ethylene glycol/Fluoride solution
Operating Temperature Range 10.0~60.0℃
Cooling Capacity 600W (25℃)
Heating Capacity 900W (25℃)
Temperature Stability ±0.05℃
Power Supply Single-phase 100 to 240 VAC, 50/60Hz
Overload Current 13.5A
Current Consumption 7.5A(100V)~3.2A(240V)
Circulating Fluid Pump Magnetic drive pump 19L/min,30m lift
Tank Capacity Approx. 3.0L
Port Size IN/OUT G3/8 Drain G3/8 (with plug)
Wetted Parts Material SUS 304,EPDM,PE,ABS
Factory
cooling
water
Temperature Range 10~35℃
Pressure Range ≤1MPa
Required Flow Rate ≥7L/min
Port Size G3/8
Wetted Parts Material SUS 304, EPDM, PE
Communications I/O, ETH, RS232, RS485
Product Size 539.5*234.5*358mm
Weight Approx 22kg
Safety Standards EN60204-1 CE marking